Publicité
All manuals and user guides at all-guides.com
EC554700
Cap bolt
EC555000
ASSEMBLY AND INSTALLATION
EC5551A0
Front fork assembly
To install the damper rod into the inner
tube, hold the inner tube aslant. If the inner
tube is held vertically, the damper rod may
fall into it, damaging the valve inside.
NOTE:
5 - 32
FRONT FORK
1. Inspect:
Cap bolt 1
O-ring 2
Air bleed screw 3
Wear/damage → Replace.
1. Wash the all parts in a clean solvent.
2. Install:
Damper rod 1
To inner tube 2.
CAUTION:
ACHTUNG:
3. Install:
Copper washer 1
O-ring 2
Base valve 3
To inner tube 4.
4. Tighten:
Base valve 1
55 Nm (5.5 m · kg, 40 ft · lb)
Use a damper rod holder 2 to lock the
damper rod 3.
®
Apply the LOCTITE
on the base valve
thread.
Damper rod holder:
YM-1423/90890-01423
CHAS
New
Publicité
