Publicité
All manuals and user guides at all-guides.com
REAR SHOCK ABSORBER
EC583000
REMOVAL POINTS
EC583300
Bearing
NOTE:
Press in the bearing while pressing its outer
race and remove the stopper ring.
NOTE:
Remove the bearing by pressing its outer race.
EC584000
INSPECTION
EC584110
Rear shock absorber
EC585000
ASSEMBLY AND INSTALLATION
EC585300
Bearing
NOTE:
Install the bearing parallel until the stopper ring
groove appears by pressing its outer race.
Do not apply the grease on the bearing
outer race because it will wear the rear
shock absorber surface on which the bear-
ing is press fitted.
5 - 60
1. Remove:
Stopper ring 1
2. Remove:
Bearing 1
1. Inspect:
Damper rod 1
Bends/damage → Replace absorber
assembly.
Shock absorber 2
Oil leaks → Replace absorber assem-
bly.
Gas leaks → Replace absorber assem-
bly.
Spring 3
Damage → Replace spring.
Fatigue → Replace spring.
Move spring up and down.
Spring guide 4
Wear/damage → Replace spring guide.
Bearing 5
Free play exists/unsmooth revolution/
rust → Replace.
1. Install:
Bearing 1
CAUTION:
ACHTUNG:
CHAS
Publicité
