Publicité
All manuals and user guides at all-guides.com
Temp.
-20
-10
0
10
20
30
10W/30
10W/40
20W/40
20W/50
-4
14
30
50
68
86
ENGINE OIL LEVEL INSPECTION
4. Inspect:
NOTE:
When inspecting the oil level, do not screw the
oil level gauge into the oil tank.
Insert the gauge lightly.
(For USA and CDN)
CAUTION:
Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
Do not allow foreign material to enter the
crankcase.
(Except for USA and CDN)
°C
40
50
104
122
°F
CAUTION:
Do not add any chemical additives or use
a
oils with a grade of CD a or higher.
Do not use oils labeled "ENERGY CON-
SERVING II" b or higher. Engine oil also
lubricates the clutch and additives could
b
cause clutch slippage.
Do not allow foreign materials to enter the
crankcase.
3 - 14
INSP
ADJ
Oil level
Oil level should be between maximum
a and minimum b marks.
Oil level low → Add oil to proper level.
Recommended oil:
At 5 ˚C (40 ˚F) or higher Å
Yamalube 4 (20W40) or SAE
20W40 type SH motor oil
(Non-Friction modified)
At 15 ˚C (60 ˚F) or lower ı
Yamalube 4 (10W30) or SAE
10W30 type SH motor oil
(Non-Friction modified)
and/or
Yamalube 4-R (15W50)
(Non-Friction modified)
Recommended oil:
Refer to the following chart for
selection of oils which are suited
to the atmospheric temperatures.
Recommended engine oil classi-
fication:
API STANDARD:
API "SH" or higher grade
(Designed primarily for motor-
cycles)
Publicité
