Publicité
EC140001
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are
provided. Refer to the list provided to avoid errors when placing an order.
NOTE:
For U.S.A. and Canada, use part number starting with "YM-" or "YU-".
For others, use part number starting with "90890-".
Part number
YU-01135-A, 90890-01135
Crankcase separating tool
YM-01305, 90890-01305
Crankcase separating bolt
These tools are used to split the crankcase as well as
remove the crankshaft from either case.
YU-01235, 90890-01235
Rotor holding tool
This tool is used when loosening or tightening the fly-
wheel magneto securing nut.
YU-03097, 90890-01252
Dial gauge and stand
YU-01256
Stand
These tools are used to set the ignition timing.
Crankcase installing tool
YU-90050, 90890-01274
Pot
YU-90050, 90890-01275
Bolt
YU-91044, 90890-04081
Spacer
YU-90062, 90890-01277
Adapter
These tools are used to install the crankshaft.
YU-01304, 90890-01304
Piston pin puller
This tool is used to remove the piston pin.
YU-24460-1, 90890-01325
Radiator cap tester
YU-33984, 90890-01352
Adapter
These tools are used for checking the cooling sys-
tem.
YM-01189, 90890-01189
Flywheel puller
This tool is used to remove the flywheel magneto.
All manuals and user guides at all-guides.com
Tool name/How to use
1 - 6
SPECIAL TOOLS
Illustration
YU-01135-A
YM-01305
YU-01235
YU-03097
YU-01256
YU-90050
YU-90062
YU-91044
YU-01304
YU-24460-01
YU-33984
YM-01189
GEN
INFO
90890-01135
90890-01305
90890-01235
90890-01252
90890-01274
90890-01275
90890-01277
90890-04081
90890-01304
90890-01325
90890-01352
90890-01189
Publicité
