Publicité
OIL FILTER, WATER PUMP AND CRANKCASE COVER
All manuals and user guides at all-guides.com
EC4G3000
REMOVAL POINTS
EC4G3110
Impeller shaft
NOTE:
Hold the impeller shaft on its width across the
flats a with spanners, etc. and remove the
impeller.
EC4G3210
Oil seal
NOTE:
It is not necessary to disassemble the water
pump, unless there is an abnormality such as
excessive change in coolant level, discolora-
tion of coolant, or milky transmission oil.
EC4G4000
INSPECTION
EC444200
Impeller shaft
4 - 49
(RIGHT)
1. Remove:
Impeller 1
Plain washer 2
Impeller shaft 3
1. Remove:
Bearing 1
2. Remove:
Oil seal 1
1. Inspect:
Impeller shaft 1
Bend/wear/damage → Replace.
Fur deposits → Clean.
ENG
Publicité
