Publicité
Å
ı
ı
Å
Å
ı
All manuals and user guides at all-guides.com
FRONT BRAKE AND REAR BRAKE
EC5A3000
REMOVAL POINTS
EC5A3100
Brake fluid
NOTE:
Do not remove the diaphragm.
Å Front
ı Rear
Å Front
ı Rear
EC533301
Caliper piston
Å Front
ı Rear
5 - 14
1. Remove:
[Front]
Master cylinder cap 1
[Rear]
Master cylinder guard 1
Reservoir tank cap 2
2. Connect the transparent hose 1 to the
bleed screw 2 and place a suitable con-
tainer under its end.
3. Loosen the bleed screw and drain the
brake fluid while pulling the lever in or
pushing down on the pedal.
CAUTION:
ACHTUNG:
Do not reuse the drained brake fluid.
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled
fluid immediately.
1. Remove:
Caliper piston
Use compressed air and proceed care-
fully.
WARNING
Cover piston with rag and use extreme
caution when expelling piston from cylin-
der.
Never attempt to pry out piston.
Caliper piston removal steps:
Insert a piece of rag into the caliper to lock
one caliper.
Carefully force the piston out of the caliper
cylinder with compressed air.
CHAS
Publicité
