Publicité
All manuals and user guides at all-guides.com
ASSEMBLY AND INSTALLATION
Balancer, balancer drive gear and balancer
driven gear
NOTE:
When installing the balancer shaft, align the
center of the balancer shaft weight a along
the line connecting the centers of the crank-
shaft and balancer shaft.
NOTE:
Install the balancer driven gear onto the bal-
ancer while aligning the punch mark a on the
balancer driven gear with the protrusion b on
the balancer end.
NOTE:
Align the punched mark a on the balancer
drive gear with the punched mark b on the
balancer driven gear.
NOTE:
Place an aluminum plate 4 between the teeth
of the balancer drive gear 5 and driven gear
6.
4 - 55
BALANCER
1. Install:
Balancer 1
2. Install:
Balancer driven gear 1
3. Install:
Straight key 1
Balancer drive gear 2
Primary drive gear 3
4. Install:
Lock washer 1
Nut (balancer) 2
50 Nm (5.0 m · kg, 3.6 ft · lb)
Nut (primary drive gear) 3
75 Nm (7.5 m · kg, 54 ft · lb)
5. Bend the lock washer tab.
ENG
Publicité
