Télécharger Imprimer la page

Yamaha YZ426FM/LC Manuel D'atelier page 484

Publicité

All manuals and user guides at all-guides.com
NOTE:
Fill with the fork oil up to the top end of the
outer tube, or the fork oil will not spread over to
every part of the front forks, thus making it
impossible to obtain the correct level.
Be sure to fill with the fork oil up to the top of
the outer tube and bleed the front forks.
NOTE:
Be sure to install the spring guide 2 when
checking the oil level.
Never fail to make the oil level adjustment
between the maximum and minimum level
and always adjust each front fork to the
same setting. Uneven adjustment can
cause poor handling and loss of stability.
5 - 36
FRONT FORK
19. Wait ten minutes until the air bubbles
have been removed from the front fork,
and the oil has dispense evenly in system
before setting recommended oil level.
20. Measure:
Oil level (left and right) a
Out of specification → Adjust.
Standard oil level:
130 mm (5.12 in)
Extent of adjustment:
80 ~ 150 mm (3.15 ~ 5.91 in)
From top of outer tube with
inner tube and damper rod 1
fully
compressed
spring.
WARNING
CHAS
without

Publicité

loading

Ce manuel est également adapté pour:

Yz426f/lc