Publicité
All manuals and user guides at all-guides.com
EC5B3000
REMOVAL POINTS
EC5B3100
Master cylinder
EC5B3200
Grip
NOTE:
Blow in air between the handlebar or tube
guide and the grip. Then remove the grip
which has become loose.
EC5B4000
INSPECTION
EC5B4100
Handlebar
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
EC5B5000
ASSEMBLY AND INSTALLATION
NOTE:
5 - 41
HANDLEBAR
1. Remove:
Master cylinder bracket 1
Master cylinder 2
CAUTION:
ACHTUNG:
Do not let the master cylinder hang on the
brake hose.
Keep the master cylinder cap side hori-
zontal to prevent air from coming in.
1. Remove:
Grip 1
1. Inspect:
Handlebar 1
Bends/cracks/damage → Replace.
WARNING
1. Install:
Handlebar 1
Handlebar holder 2
Bolt (handlebar holder) 3
23 Nm (2.3 m · kg, 17 ft · lb)
The upper handlebar holder should be
installed with the punched mark a forward.
First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
CHAS
Publicité
