Publicité
All manuals and user guides at all-guides.com
EC484500
Friction plate
EC484600
Clutch plate
Push lever
EC484810
Push rod
EC495000
ASSEMBLY AND INSTALLATION
Push lever
NOTE:
Apply the engine oil on the oil seal lip and push
lever.
4 - 44
CLUTCH
1. Measure:
Friction plate thickness
Out of specification → Replace friction
plate as a set.
Measure at all four points.
Friction plate thickness:
2.9 ~ 3.1 mm
(0.114 ~ 0.122 in)
<Limit>: 2.7 mm (0.106 in)
1. Measure:
Clutch plate warpage
Out of specification → Replace clutch
plate as a set.
Use a surface plate 1 and thickness
gauge 2.
Warp limit:
0.1 mm (0.004 in)
1. Inspect:
Push lever 1
Wear/damage → Replace.
1. Inspect:
Push rod 1 1
Bearing 2
Plain washer 3
Push rod 2 4
Wear/damage/bend → Replace.
1. Install:
Push lever 1
ENG
Publicité
