Publicité
Les langues disponibles
Les langues disponibles
Footboard LED indicators (Continued)
Patient control gatch lock
D
Patient control bed height lock
E
F
Zone 1
G
Zone 2
H
Zone 3
A
B
Indicator
A
Bed motion lock
B
Fowler 30°+
Low height
C
D
Brake
Bed exit (optional)
E
Bed zero (optional iBed Awareness)
F
Siderail (optional iBed Awareness)
G
H
Power
www.stryker.com
Operation
Indicator
C
D
Figure 1-24: Footboard LED indicators
3005-009-005 REV A
LED illuminates amber
The patient control gatch lock is on
The patient control bed height lock is on
Bed exit is on and zone 1 is active. The LED will
blink amber if a bed exit event occurs.
Bed exit is on and zone 2 is active. The LED will
blink amber if a bed exit event occurs.
Bed exit is on and zone 3 is active. The LED will
blink amber if a bed exit event occurs.
E
F
LED illuminates amber
Bed motion lock is activated or when the patient
control (Fowler, gatch, bed up/down) lock buttons
are activated
Fowler 30°+ is locked. The LED will blink amber if:
•
iBed Awareness system is on
•
Fowler 30°+ is being monitored and the Fowler
goes below 30 degrees
•
Fowler 30°+ is turned off
Bed is in low height. The LED will blink amber if:
•
iBed Awareness system is on
•
Low height is being monitored
•
Bed is not in low height
Brake is set, and will blink amber if the brake is not
set
Bed exit is armed. The LED will blink amber if:
•
Bed exit is turned off while the iBed Awareness
system is turned on
•
Bed exit alarms while monitored by the iBed
Awareness system
Bed zero is successful
iBed Awareness system is on. The LED will blink
amber when siderail state has changed.
Green when bed has power.
English
G
H
1-39
EN
Publicité
