Télécharger Imprimer la page

Stryker S3 MedSurg Manuel D'utilisation page 29

Masquer les pouces Voir aussi pour S3 MedSurg:

Publicité

Les langues disponibles

Les langues disponibles

Raising the siderails (Continued)
Lowering the siderails
WARNING
Always set the siderail position to make sure that a patient is safely in the product.
Always lock the operator control panel and patient control panel when the patient is unattended.
Always keep the siderails outside of the oxygen tent.
Note: Do not use siderails as a patient restraint device.
To lower the siderail to the intermediate position, grasp the release handle and rotate the siderail forward until it locks
into the intermediate position
To lower the siderail to its lowest position, grasp the release handle and rotate the siderail forward
1-24).
Notes
You can stow the siderail under the litter when the siderail is at its lowest position.
Make sure that the siderail is in the lowest position before you raise the siderail directly to the full up position. If you
do not completely lower the siderail, the siderail will lock into the intermediate position when you raise the siderail.
www.stryker.com
Operation
Figure 1-11: Siderail highest position
(Figure 1-12 on page
1-23).
Figure 1-12: Siderail intermediate position
3005-009-005 REV A
English
(Figure 1-13 on page
1-23
EN

Publicité

loading

Ce manuel est également adapté pour:

3005