Publicité
Les langues disponibles
Les langues disponibles
English
Replacing the nurse call backup battery (option) (Continued)
EN
If the 9V nurse call battery needs to be replaced, a message will appear on the footboard display. The battery is located
on the patient's left side at the head end of the bed (B)
battery.
To replace the battery:
1.
Unplug the power cord from the wall outlet.
2.
Separate the Velcro that holds the battery housing (B) to the litter frame and lift the battery housing until it is free
from the litter frame
3.
Discard the battery.
Note: Follow local regulations for disposal or recycling of this part.
4.
Reverse steps to reinstall.
1-28
Operation
A
Figure 1-18: Cord out switch position
Figure 1-19: Battery housing
(Figure 1-19 on page
1-28).
3005-009-005 REV A
(Figure 1-19 on page
1-28). No tools are required to replace the
www.stryker.com
Publicité
