Publicité
Les langues disponibles
Les langues disponibles
English
Transporting the product with steer lock (Continued)
EN
Activating the CPR release
CAUTION
Always make sure that all persons and equipment are away from the area below and around the Fowler before you
activate the CPR release. The CPR release is for emergency use only.
When you raise the Fowler and need quick access to the patient, you can position the product to 0° by activating the
CPR release.
You can find the two CPR release levers at the head end section on both the left and right sides of the Fowler (A)
(Figure 1-6 on page
To activate the CPR release:
1.
Grasp and squeeze the lever on either side of the Fowler.
2.
Guide the Fowler to the flat position.
1-18
Figure 1-5: Applying or releasing steer lock
1-19).
Operation
3005-009-005 REV A
www.stryker.com
Publicité
