Stryker S3 MedSurg Manuel D'utilisation page 48

English
Footboard control panel - Scale (Continued)
EN
2. Release the Zero button.
Note: Do not touch the product when you set the scale to zero
A confirmation notification indicates that setting the scale to zero was successful
Notes
• The Bed Zero LED on the footboard LED indicator illuminates.
• The scale icon and 0.0 appears on the footboard display.
Note: If you first receive an Unable to Zero - Try Again notification, the scale attempts to set the scale to zero again for
30 seconds. After three attempts, the scale system locks and an Unable to Zero notification appears.
Menu display
The S3 footboard control panel has a menu that displays the menus for S3 functions and features.
1-42
Operation
(Figure 1-30 on page
Figure 1-30: Do not touch bed
Figure 1-31: Zeroing successful
Figure 1-32: Scale set to zero
3005-009-005 REV A
1-42).
(Figure 1-31 on page 1-42).
www.stryker.com