Publicité
Les langues disponibles
Les langues disponibles
English
Specifications (Continued)
EN
Compatible mattress
Thickness
6 in.
15.2 cm
Note: These mattress specifications comply with HBSW and IEC specifications.
Stryker reserves the right to change specifications without notice.
Specifications listed are approximate and may vary slightly from product to product or by power supply fluctuations.
Environmental conditions
Ambient temperature
Relative humidity (non-condendisng)
Atmospheric pressure
System requirements and recommendations for iBed Wireless (option)
To implement iBed Wireless, follow these requirements for hardware, software, and communication, product
specifications, required settings and recommendations.
Note: If minimum system requirements are not met, system performance will be impacted.
iBed Server requirements for iBed Wireless (option)
The following tables describes the server hardware and software requirements for iBed Wireless:
Hardware requirements
Capacity
1-300 connected devices
301-600 connected devices
601-800 connected devices
1-8
Introduction
Width
>= 35 in.
>= 88.9 cm
Operation
50 °F
(10 °C)
30%
700 hPa
3005-009-005 REV A
Length
>= 84 in.
>= 213.4
cm
Storage and transportation
104 °F
(40 °C)
(-30 °C)
75%
1060 hPa
500 hPa
Requirement
2.x GHz processor or better with 4 cores
Memory: 8 GB RAM
Hard drive: 150 GB
2.x GHz processor or better with 8 cores
Memory: 16 GB RAM
Hard drive: 150 GB
2.x GHz processor or better with 16 cores
Memory: 32 GB RAM
Hard drive: 150 GB
ILD
80 lb
36.3
140 °F
(60 °C)
-22 °F
95%
10%
1060 hPa
www.stryker.com
Publicité
