Publicité
Les langues disponibles
Les langues disponibles
English
Footboard control panel - Scale
EN
A
Scale
B
Zero
Note: The Bed Zero LED indicator illuminates when you set the scale to zero
Weighing a patient
WARNING
•
Do not use the scale system reading as a reference for medical treatment.
•
The scale system assists only in the monitoring of the patient's weight variation.
•
Do not set the scale to zero or weigh the patient when a support surface therapy is active. Motion from the support
surface functions may adversely affect the scale system performance.
CAUTION
Always raise the siderails when the litter is in its full down position. This prevents the scale system from weighing a
patient inaccurately.
To weigh a patient:
1.
Press and hold the Scale button (A) (see
appears
(Figure 1-25 on page
1-40
Operation
A
B
Weighs the patient
Sets the scale to zero
Footboard control panel - Scale on page
1-40).
Figure 1-25: Release button
3005-009-005 REV A
(Figure 1-24 on page
1-39).
1-40) until Release Button
www.stryker.com
Publicité
