Stryker S3 MedSurg Manuel D'utilisation page 51

Viewing the weight log
Weight history displays measured and stored weight values. The system stores a maximum of 10 weight measurements.
Any measurement taken after the tenth measurement deletes the oldest measurement taken.
Note: If the change in patient weight is less than .2 lb., the weight will not be stored.
To view weight history:
1. Press the Menu button (A). See
2. Scroll to Weight log (Figure 1-36 on page
3. Press the Enter button (F). See
Measuring weight gain or loss
The gain or loss function compares the initial patient weight to the current patient weight. It then displays the weight the
patient has gained or lost since the initial patient weight reading.
To enable gain or loss:
1. Press the Menu button (A). See
2. Scroll to Gain/Loss.
3. Press and hold the Enter button (F)
Button appears (Figure 1-38 on page
Figure 1-37: Hold to enable
www.stryker.com
Operation
Figure 1-33 on page 1-43.
1-45).
Figure 1-33 on page 1-43.
Figure 1-36: Weight log
Figure 1-33 on page 1-43.
(seeFigure 1-33 on page
1-45).
3005-009-005 REV A
1-43) (Figure 1-37 on page 1-45) until Release
Figure 1-38: Release Button
English
EN
1-45