Stryker S3 MedSurg Manuel D'utilisation page 31

Positioning the optional two-stage permanently attached IV pole (Continued)
Positioning the optional removable IV pole
CAUTION
• Do not load the IV pole above the safe working load of 40 lb (18 kg).
1. Install the pole at any of the four receptacles of the litter, located on all four corners of the frame.
2. To raise the height of the pole, turn the knob (A) counterclockwise and pull up on the telescoping portion (B) of the
pole (Figure 1-15 on page
3. Turn the knob (A) clockwise to tighten the telescoping portion (B) in place
www.stryker.com
Operation
B
Figure 1-14: Two-stage IV pole
1-26).
3005-009-005 REV A
A
C
(Figure 1-15 on page
English
EN
1-26).
1-25