Publicité
Les langues disponibles
Les langues disponibles
English
System requirements and recommendations for iBed Wireless (option)
EN
(Continued)
IEEE 802.11
RF bands
Encryption
Authentication
802.1X
Client certificates
Supported data rates
Channel plan
Other
Client device data usage
•
The client uses 10-15 KB per connected device every 40 seconds.
•
The client uses an additional 5-21 KB per device for each subscription that is created by a third-party vendor like
Connexall, Capsule, Epic, and Cerner.
Note:
Based on network conditions, device messages are typically sent in near real time or in up to five minutes while
connected. This depends on device activity like applying the brakes, adjusting the rails, alarms, and how the third-party
defines subscription times.
1-10
Introduction
a/b/g/n
2.4 GHz, 5 GHz
AES and TKIP
(TKIP is not supported with WPA2)
WPA Personal / Enterprise and WPA2 Personal /
Enterprise
PEAP-MSCHAP - V2
Stryker iBed Wireless Client(s) cannot accept or upload
certificates
802.11b/g: 1-54 Mbps
802.11a: 6-54 Mbps
802.11n: MCS0-6
2.4 GHz: All Channels Supported
5 GHz: All Channels Supported
(Recommend against using DFS and ISM Channels)
Stryker iBed Wireless Client is able to connect to an
existing SSID
3005-009-005 REV A
www.stryker.com
Publicité
