Publicité
Les langues disponibles
Les langues disponibles
English
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating
EN
or maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or
maintenance of this product.
CAUTION
•
Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in
this manual.
•
Do not modify the product or any components of the product. Modifying the product can cause unpredictable
operation resulting in injury to patient or operator. Modifying the product also voids its warranty.
Notes
•
This manual is a permanent part of the product and should remain with the product even if the product is sold.
•
Stryker continually seeks advancements in product design and quality. This manual contains the most current
product information available at the time of printing. There may be minor discrepancies between your product and
this manual. If you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
Product description
The Stryker Model 3005 S3® ® MedSurg bed has Fowler, gatch, and lift articulation capabilities that aide in the
adjustment of surface contour, angle, and height. The product offers various options outlined in the product operations
manual, including but not limited to the iBed® ® Awareness system, scale, 110 VAC option, IV pole, and defibrillator tray.
iBed Awareness allows operators to set various bed parameters to monitor bed positioning. Alerts inform operators to
patient movement within a specific zone(s) on a patient surface. The product may be equipped with an integrated scale
to weigh the patient in bed. Both the iBed Awareness system and Chaperone® ® Bed Exit system provide both visual and
audible alerts.
Indications for use
The 3005 S3 MedSurg bed is intended to support and transport patients within the Med/Surg and Critical Care hospital
environments. The 3005 S3 MedSurg bed is typically used in pre-op, post-op and recovery areas of hospital facilities.
The intended user for this product is both health care providers (HCP), such as, nurses, nurses' aides, medical doctors,
and human patients. Lockout features may limit patient accessible controls. Use this product with a patient sleep
surface. The scale output is not intended to be used to determine diagnosis or treatment.
The intended patient population for the 3005 S3 MedSurg bed includes:
•
Patients above 50 lb with a safe working load of 500 lb
•
Patients at least 2 years of age
•
Patients less than 84 in. without a bed extender or 96 in. with a bed extender
The product is not intended to support more than one individual at a time.
Indications for use for iBed Wireless
The intended use for iBed Wireless (with iBed Awareness system) is to assist clinical staff to monitor bed parameters
on specific Stryker beds. The desired bed parameters are set by operators at the bedside. iBed Wireless is only
intended for use with specifically enabled Stryker beds that have been verified and validated with iBed Wireless, and is
not intended to provide bed status information for non-Stryker beds. iBed Wireless is not intended to communicate any
patient status information, nor to permanently store any type of data. iBed Wireless with iBed Awareness system is not
intended to provide automated treatment decisions or as a substitute for professional healthcare judgment. iBed
Wireless with iBed Awareness system is not a replacement or substitute for vital signs monitoring or alert equipment. All
patient medical diagnosis and treatment are to be performed under direct supervision and oversight of an appropriate
healthcare professional.
1-6
Introduction
3005-009-005 REV A
www.stryker.com
Publicité
