Stryker S3 MedSurg Manuel D'utilisation page 53

Changing equipment (Continued)
2. Scroll to Change Equip..
3. Press and hold the Enter button (F) (see
Equipment appears (Figure 1-43 on page
Figure 1-42: Hold to Change Equipment
4. Release Enter.
Note: Do not touch the product when you change equipment
A confirmation notification indicates when you are able to add/remove equipment
5. Press the Enter button (F). See
Note: Do not touch the product when configuring to change equipment.
6. Add or remove equipment or devices from the product.
7. After adding or removing equipment or devices from the product, press the Enter button (F). See
page 1-43.
To cancel the request, press the Exit button (E). See
Changing the patient weight
To change the patient weight:
1. Press the Menu button (A). See
2. Scroll to Change Ptnt Wght.
www.stryker.com
Operation
Figure 1-33 on page
1-47).
(Figure 1-44 on page
Figure 1-44: Do not touch bed
Figure 1-33 on page 1-43.
Figure 1-33 on page
Menu display on page 1-42.
3005-009-005 REV A
1-43) (Figure 1-42 on page 1-47) until Add / Remove
Figure 1-43: Add / Remove Equipment
1-47).
(Figure 1-43 on page
1-43.
English
EN
1-47).
Figure 1-33 on
1-47