Publicité
Les langues disponibles
Les langues disponibles
Changing the scale units (Continued)
3.
Press the Enter button (F). See
4.
Select a scale unit
(Figure 1-48 on page
5.
Press the Enter button (F). See
To cancel the request, press the Exit button (E). See
Changing the backlight intensity
The backlight changes the LED backlight intensity for all control panels (operator control panel, patient control panel,
and footboard control panel).
Note: The default backlight intensity is low.
Five settings are available for the control panel LED intensity.
Setting
1
2
3
4
5
Note: The nurse call LED backlight on the patient control panel shows the patient which button to press to contact the
nurse's station. Turning the nurse call LED backlight light off may compromise this ability in a darkened room.
To change the backlight LED intensity:
1.
Press the Menu button (A). See
2.
Scroll to Backlight.
3.
Press the Enter button (F). See
4.
Select a backlight intensity
5.
Press the Enter button (F). See
www.stryker.com
Operation
Menu display on page
1-42.
1-49).
Figure 1-48: Scale Units
Menu display on page
1-42.
Menu display on page
Menu display on page
1-42.
Menu display on page
1-42.
(Figure 1-49 on page
1-49).
Figure 1-49: Backlight
Menu display on page
1-42.
3005-009-005 REV A
1-42.
LED intensity
Off
Low
Medium
High
Nurse call only
English
EN
1-49
Publicité
