Publicité
Les langues disponibles
Les langues disponibles
English
Changing the patient weight (Continued)
EN
3.
Press and hold the Enter button (F) (see
Button appears
4.
Release the Enter button.
Note: Do not touch the product when configuring patient weight
5.
When the system is ready to change patient weight, press the Up arrow button (C) or Down arrow button (D) to
change the displayed weight (see
6.
After changing the weight, press the Enter button (F) (see
Weight Changed will display.
To cancel the request, press the Exit button (E) (see
Canceled will display.
Changing the scale units
You can change the measuring unit to pounds (lb) or kilograms (kg) on your display.
Note: The default scale unit is pounds (lb).
To change the displayed scaled units:
1.
Press the Menu button (A). See
2.
Scroll to Scale Units.
1-48
Menu display on page
(Figure 1-46 on page
1-48).
Figure 1-45: Hold to change patient weight
Figure 1-46: Release Button
Figure 1-47: Do not touch bed
Menu display on page
Menu display on page
Operation
1-42)
(Figure 1-45 on page
(Figure 1-47 on page
1-42).
Menu display on page
Menu display on page
1-42) and the message Operation
1-42.
3005-009-005 REV A
1-48) until Release
1-48).
1-42) and the message Patient
www.stryker.com
Publicité
