Télécharger Imprimer la page

Stryker S3 MedSurg Manuel D'utilisation page 26

Masquer les pouces Voir aussi pour S3 MedSurg:

Publicité

Les langues disponibles

Les langues disponibles

English
Raising the lower leg section (Continued)
EN
Lowering the lower leg section
Prop the footrest to lower the lower leg section manually.
To lower the lower leg section:
1.
Lift up the end of the lower leg section to release the prop rod from the gatch bracket.
2.
Swing the foot prop toward the head end.
3.
Guide the foot prop down into the litter (B)
Attaching a fracture frame
WARNING
Use only retractable traction or fracture frames. Failure to use a retractable frame may result in injury to the patient
and/or damage to the equipment.
You can attach a standard fracture frame to the product using the IV sockets that are located on all four corners of the
bed. You can use IV poles with a fracture frame if you purchase the IV pole adaptor sockets
Securing a Foley bag to the Foley bag hooks
To secure a Foley bag to the Foley bag hook, place the hook of the Foley bag on the Foley bag hook. Make sure that
you secure the Foley bag to the Foley bag hook.
You can find two isolated Foley bag hooks under the gatch section on both sides of the product (A)
1-21). If you weigh the patient with the scale system, the isolated Foley bag weight is not included with the patient weight.
There are four Foley bag hooks under the seat section (B) and foot section (C) on both sides of the product
on page
1-21). If you weigh the patient with the scale system, the Foley bag weight is included with the patient weight.
1-20
Operation
Figure 1-7: Raising or lowering the lower leg section
(Figure 1-7 on page
3005-009-005 REV A
A
B
1-20).
(Accessories on page
1-59).
(Figure 1-8 on page
(Figure 1-9
www.stryker.com

Publicité

loading

Ce manuel est également adapté pour:

3005