Photos - MORIA CBm-ALTK CBSU Manuel Utilisateur

11 PHOTOS

A. CBm-ALTK HEAD
1 Head calibration value
2 Female collar (base)
3 Blade slot
4 Sliding guide
B. CBSU HEAD FOR ARTIFICIAL CHAMBER
1 Head calibration value
2 Female collar (base)
C. CBm BLADE
1 Cutting edge
2 Blade holder
D. CBm-ALTK HEAD WITH CBm BLADE
1 CBm-ALTK head
2 CBm blade
E. ASSEMBLY: CBm-ALTK HEAD ON THE CB
TURBINE
1 CB turbine
2 CBm-ALTK head
F. ASSEMBLY: CBSU HEAD FOR ARTIFICIAL
CHAMBER ON THE CB TURBINE
1 CB turbine
2 CBSU head for artificial chamber
3 CBSU head blister for artificial chamber
G. ASSEMBLY: TURBINE AIR SUPPLY HOSE
1 Turbine air supply hose – turbine side
2 CB turbine
3 CBm-ALTK head
4 Front face of the console
5 Turbine air supply hose – console side
H CBSU MANUAL SUCTION RING
1 Handle
2 Stop pin
3 Smooth pivot (manual ring)
4 Sliding guide
5 Aperture
I. CONNECTING THE SUCTION RING TO THE
ASPIRATION TUBING
1 Aspiration tubing end
2 Suction ring
J. MOUNTING CB MICROKERATOME ON THE
SUCTION RING
1 CB turbine with CBm-ALTK head
2 Suction ring
K. FLATTENING LENSES
1 Diameter value
2 Handle
3 Reticles of variable diameter
L. STERILIZATION STORAGE BOX
1 CB turbine
2 Pneumatique turbine hose
3 Suction rings
4 CBm-ALTK heads
5 Tonometer
#65078-B-02.2017
15
MORIA