This user guide presents all the information necessary for using and maintaining the CB microkeratome
(associated with the ALTK artificial chamber and the single-use artificial chamber), its heads (reusable or
single-use) and its accessories (see list below).
The latest version of these user guides and additional information about your microkeratome are available on
Moria's restricted-access website: http://www.moria-surgical.com. You must register to access it.
1 WARNINGS
1.1 MAINTENANCE
The CBm-ALTK and CBSU system for artificial chambers was designed to ensure optimal functionality,
provided that the maintenance recommendations are scrupulously followed. If for any reason the system
does not function correctly, please have it checked immediately by Moria. Moria strongly recommends annual
maintenance and servicing of all its reusable products in order to maintain the original performance of your
microkeratome.
As only Moria and its agents are fully expert in Moria products, servicing and maintenance must be carried
out by Moria or its approved agents.
Moria is not liable for malfunction or damage to apparatus, poor results, or surgical complications because
maintenance was carried out by an unqualified operator or third party.
Any such unauthorized intervention renders the warranty and any maintenance contract null and void.
1.2 USE OF GENERIC PRODUCTS OR REUSE OF SINGLE-USE CONSUMABLES
The materials for the blade, blade holder and microkeratome head have been selected for their biocompatibility
and drag-free characteristics. Blade dimensions and tolerances have been designed to match the dimensions
and tolerances of the keratome head. Moria's manufacturing and control procedures guarantee that there is
no dimensional incompatibility between the head and the blade, and ensures that the blade slides freely in
the head.
Products designed for single-use must not be reused under any circumstances. The reuse of single-
use products, or the use of consumables other than those supplied by Moria, may entail serious
surgical consequences and damage the microkeratome.
Moria is not liable for malfunction or damage to the microkeratome, poor results or surgical complications
caused by the reuse of a single-use product or products not supplied by Moria. The elements of this system
should be connected only to Moria equipment (console, heads, rings, etc.). All warranties become null and
void if the microkeratome degrades or malfunctions due to such practices.
2
MORIA
#65078-B-02.2017