Using The Rigid Push Bars; Installing The Base Storage Net - Stryker Power-PRO IT Manuel D'utilisation

USING THE RIGID PUSH BARS

English
Use the rigid push bars to enhance emergency mobility through sturdy push points while maintaining solid stability.
Push bars are available for installation at both the head end (A) and foot end (B) of the cot as shown in Figure 45.

INSTALLING THE BASE STORAGE NET

To install the base storage net, wrap the Velcro
CAUTION
• The weight of the equipment in the base storage net (if equipped) must not exceed 20 lb (9 kg).
• Be careful when retracting the base to avoid damaging items stored in the base storage net.
Return To Table of Contents
1-58
Operation Guide
A
B
Figure 45
® straps around the base tubes.
6516-109-005 REV B www.stryker.com