Cot Fastener Installation - Stryker Power-PRO IT Manuel D'utilisation

Note: The Cot Fastener Installation instructions on
NOT use with Power-LOAD. For Model 6516 cots with the Power-LOAD option, see the Power-LOAD Operations/
English
Maintenance Manual for installation instructions.
The Stryker Cot Fastener Systems are designed to be compatible only with cots which conform to the installation
specifications listed on
WARNING
It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Cot Fastener Systems meets the
installation specifications listed on
System.
Note: Adjustment of the rail clamp assembly may be required in order to compensate for any variation in the cot
retaining post position depending on the cot manufacturer and model number.
For more information about the Stryker Cot Fastener Systems, see the Cot Fastener Operations/Maintenance Manual.
Return To Table of Contents
1-20

Cot Fastener Installation

page 1-21.
page 1-21. Injury may result if a non-compatible cot is used in the Stryker Fastener
6516-109-005 REV B
page 1-20 through page 1-22 are intended for cots that you will
www.stryker.com