Stryker Power-PRO IT Manuel D'utilisation page 22

CAUTION (CONTINUED)
English
• Hydraulic lines, hoses, and connections can fail or loosen due to physical damage, kinks, age, and environment
exposure. Check hoses and lines regularly to avoid damage to the cot. Check and tighten loose connections.
• Do not tip the cot onto its load wheels and actuate the product as this will allow air to enter the hydraulic system.
• Do not lubricate the bearings in the X-frame as it will degrade the performance of the cot and may void its warranty
(see page 1-91).
• The cot retaining post is shipped preconfigured for an X-frame cot. If the cot fastener has been configured for an
H-frame cot, you must adjust the cot retaining post to accommodate the cot fastener.
Return To Table of Contents
1-16
Summary of Safety Precautions
6516-109-005 REV B www.stryker.com