Stryker Power-PRO IT Manuel D'utilisation page 50

UNLOADING THE COT FROM A VEHICLE WITH TWO OPERATORS - MANUAL METHOD (CONTINUED)
English
4. Operator 2 − Pull the safety bar release lever forward
to disengage the safety bar from the safety hook in the
patient compartment (Figure 26).
5. Remove the load wheels from the patient compartment
of the vehicle.
CAUTION
When unloading the cot from the patient compartment, ensure
that the caster wheels are safely set on the ground or damage
to the product may occur.
Return To Table of Contents
1-44
Operation Guide
Figure 26: Disengaging the Safety Bar
6516-109-005 REV B www.stryker.com