Cleaning The Motorcycle - Ducati 999R Manuel D'utilisation Et D'entretien

Cleaning the motorcycle

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in. Use specific
products only. Prefer biodegradable products. Avoid
aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
E
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces. Never clean the motorcycle
using hot or high-pressure water jets. Cleaning the
motorcycle with water cleaners may lead to seizure or
severe failure of front fork, wheel hub assembly, electric
system, front fork seals, air inlets or exhaust silencers and
adversely affect the operation of motorcycle safety
features.
If needed, clean off stubborn dirt or exceeding grease from
engine parts using a degreasing agent. Be sure to avoid
contact with drive parts (chain, sprockets, etc.). Rinse with
warm water and dry all surfaces with chamois leather.
78
Warning
Loss of braking may occur immediately after washing
the motorcycle. Never grease or lubricate the brake discs.
Loss of braking and further accidents may occur. Clean the
discs with an oil-free solvent.