Changing The Master Code - Sygonix 2299888 Mode D'emploi

• Enter the master code ("123456: by default):
• Press the
The default master code "123456" must be changed as
described in section 11 "Programming", "c) Changing
the master code" before the code lock is placed into
regular use.
• The code lock will emit a beep and the LED indicator (2) will
briefly turn red. The LED indicator (2) will then turn orange.
Programming mode is now enabled.
Exiting programming mode
Programming mode exits automatically after 30
seconds if no programming commands (key presses)
are made. The code lock will then return to standby
mode (the LED indicator (2) will turn red).
c) Changing the master code
• The code lock must be in standby mode and the LED
indicator (2) must be red.
• Enabling programming mode (see section 11 "Programming",
"b) Enabling/exiting programming mode". The LED indicator
(2) will then flash red.
Example:
• Press the
24
key to confirm your entry.
key. The LED indicator (2) will turn orange.
(factory setting)