Charging The Battery - Sygonix SY-DB-500 Mode D'emploi

10. Charging the battery

Make sure the cover is properly sealed. It will prevent
moisture from entering the compartment.
1. Open the port cover.
2. Insert one end of the USB cable into the MicroUSB charging
port on the product and the other end to a suitable power
adaptor.
3. The battery status is as follows:
Light
Blue
Blue/red
Red
You can set a low battery push notification in the app.
Status
3x flash,
pause, repeat
Always on
3 secs flash
then off
Description
Charging
Fully charged
Battery low
Product will shut down after the
status light goes off.
37