Connection Cable - Sygonix 2299888 Mode D'emploi

8. Connection cable

Colour
Yellow
Red
Black
White
Brown
Green
Connection for operating voltage (wires: Red + black)
The power supply (18 V/DC) must be connected here. Pay
attention to the correct polarity. The code lock requires a current
of max. 100 mA. It also requires power for the alarm output siren
(up to 2 A).
Potential-free changeover contact (wires: white + brown
+green)
The potential-free changeover contact (see "Technical data"
section for contact rating) is activated in the event of a successful
access attempt (correct transponder card or fingerprint). The
switch-on duration can be programmed (max. 99 seconds).
Toggle operation is also possible.
16
Function
Connection for the opening button
Positive pole up to 9 -18 V/DC (regulated)
Negative pole ground connection (GND)
N.O. connection for relay in fail-safe
configuration
COM contact of the relay
N.C. connection for relay in fail-secure
configuration