Code Lock; Remote Control - Sygonix 2299888 Mode D'emploi

A battery change is required if the range decreases
significantly over time or the code lock stops responding
to the remote control.
b) Code lock
• After completing the installation and connection process,
switch on the operating voltage.
• The code lock will emit a short beep. The LED indicator on the
top of the code lock will be bright red.

10. Remote control

The remote control is used to program the code lock by pressing
a button. If a digit is requested in the following section, use the
corresponding button on the remote control.
Number keys 0 to 9
Asterisk key
Cross key
21