Publicité
NomoLine ISA CO2
1.
Connect the NomoLine ISA CO2 cable to the host device connection port.
2.
Connect a NomoLine sampling line to the NomoLine ISA CO2 input connector.
3.
Power up the host device.
4.
Check that the LEGI indicator shows a steady green light, indicating that
NomoLine ISA CO2 is ready for use.
Note: Without a sampling line connected, the LEGI Indicator does not illuminate.
5.
Breathe briefly into the sampling line and check that a valid CO
values are displayed on the host device screen.
6.
Occlude (obstruct) the sampling line and wait for 10 seconds.
7.
Check that an occlusion alarm is displayed and that the LEGI connector shows a
flashing red light.
Zeroing
The highly stable NomoLine ISA CO2 spectrometer requires no regular zeroing. A room air
reference measurement is performed when the NomoLine is disconnected from the LEGI
connector, provided that CO
measurements are stable. This zeroing procedure is indicated by
2
the LEGI blinking green.
Repair Policy
Masimo or an authorized Service Department must perform warranty repair and service. Do
not use malfunctioning equipment. Have the instrument repaired.
Please clean contaminated and/or dirty equipment before returning, following the cleaning
procedure described in Cleaning on page 33. Make sure the equipment is fully dry before
packing.
To return the NomoLine ISA CO2 for service, please follow the Return Procedure below on
page 34.
Return Procedure
Clean contaminated/dirty equipment before returning, following instructions in Cleaning on
page 33. Make sure the equipment is fully dry before packing. Contact the seller to request
instructions on how to return the equipment. Package the equipment securely, in the original
shipping container if possible, and enclose or include the following information and items (or
other information as the seller requires):
•
A letter describing in detail any difficulties experienced with the NomoLine ISA
CO2.
•
Warranty information, a copy of the invoice or other applicable documentation
must be included.
•
Purchase order number to cover repair if the NomoLine ISA CO2 is not under
warranty, or for tracking purposes if it is.
•
Ship-to and bill-to information.
•
Person (name, telephone/Telex/fax number, and country) to contact for any
questions about the repairs.
www.masimo.com
Chapter 7: Service and Maintenance
waveform and
2
34
Masimo
NomoLine ISA CO2
•
A certificate stating the NomoLine ISA CO2 has been decontaminated for
bloodborne pathogens.
•
Return the NomoLine ISA CO2 to the shipping address provided by the seller.
Sales & End-User License Agreement
This document is a legal agreement between you ("Purchaser") and Masimo Corporation
and/or its relevant subsidiary or affiliate ("Masimo") for the purchase of this Product
("Product") and a license in the included or embedded software and/or firmware ("Software").
Except as otherwise expressly agreed in a separate contract for the acquisition of this Product,
the following terms are the entire agreement between the parties regarding your purchase of
this Product. If you do not agree to the terms of this agreement, promptly return the entire
Product, including all accessories, in their original packages, with your sales receipt to
Masimo for a full refund. BY ACCEPTANCE OR USE OF THIS PRODUCT, YOU ACKNOWLEDGE
YOUR ACCEPTANCE OF THESE TERMS.
Limited Warranty
Masimo warrants to the original end-user Purchaser that the Product and any Software media
contained in the original packaging will conform to Masimo's published specifications in
effect at the time of manufacture when used in accordance with Masimo's user manuals,
technical specifications, and other Masimo published guidelines for a period of 12 months
and any batteries for six (6) months from the original date the Product was obtained by the
end-user purchaser.
Masimo's sole obligation under this warranty is the repair or replacement, at its option, of any
defective Product or Software media that is covered under the warranty.
To request a replacement under warranty, Purchaser must contact the seller, and follow all
instructions and procedures given by the seller. If Masimo determines that a Product must be
replaced under warranty, it will be replaced and the cost of shipment covered. All other
shipping costs must be paid by Purchaser.
Exclusions
The warranty does not apply to any non-Masimo branded product or any software, even if
packaged with the Product, or any Product that was: (a) not new or in its original packaging
when supplied to purchaser; (b) modified without Masimo's written permission; (c) damaged
by supplies, devices, or systems external to the Product; (d) disassembled, reassembled, or
repaired by anyone other than a person authorized by Masimo; (e) used with other products,
like new sensors, reprocessed sensors, or other accessories, not intended by Masimo to be
used with the Product; (f) not used or maintained as provided in the operator's manual or as
otherwise provided in its labeling; (g) reprocessed, reconditioned, or recycled; and (h)
damaged by accident, abuse, misuse, liquid contact, fire, earthquake or other external cause.
No warranty applies to any Product provided to Purchaser for which Masimo, or the seller,
is not paid; and these Products are provided AS-IS without warranty.
Limitation of Warranty
Except as otherwise required by law or altered by the purchase agreement, the above
warranty is the exclusive warranty that applies to the Product and Software media, and
www.masimo.com
Chapter 7: Service and Maintenance
35
Masimo
Publicité
