Publicité
Les langues disponibles
Les langues disponibles
1
Notes on the operating manual
This operating manual is an important aid for ensuring the safe and reliable
functioning of the device.
The operating manual will help you to:
•
avoid any risks to personnel.
•
become acquainted with the device.
•
achieve optimal functioning.
•
identify and rectify faults in good time.
•
avoid any faults due to improper operation.
•
cut down on repair costs and reduce the number of downtimes.
•
improve the reliability and increase the service life of the device.
•
avoid causing harm to the environment.
Reflex Winkelmann GmbH accepts no liability for any damage resulting from
failure to observe the information in this operating manual. In addition to the
requirements set out in this operating manual, national statutory regulations and
provisions in the country of installation must also be complied with (concerning
accident prevention, environment protection, safe and professional work practices,
etc.).
This operating manual describes the device with basic equipment and interfaces
for optional equipment with additional functions. For optional equipment and
accessories, 4.6 "Optional equipment and accessories", 32.
Notice!
Every person installing this equipment or performing any other work at the
equipment is required to carefully read this operating manual prior to
commencing work and to comply with its instructions. The manual is to be
provided to the product operator and must be stored near the product for
access at any time.
2
Liability and guarantee
The device has been built according to the state of the art and recognised safety
rules. Nevertheless, its use can pose a risk to life and limb of personnel or third
persons as well as cause damage to the system or other property.
It is not permitted to make any modifications at the device, such as to the hydraulic
system or the circuitry.
The manufacturer shall not be liable nor shall any warranty be honoured if the
cause of any claim results from one or more of the following causes:
•
Improper use of the device.
•
Unprofessional commissioning, operation, service, maintenance, repair or
installation of the device.
•
Failure to observe the safety information in this operating manual.
•
Operation of the device with defective or improperly installed
safety/protective equipment.
•
Failure to perform maintenance and inspection work according to schedule.
•
Use of unapproved spare parts or accessories.
Prerequisite for any warranty claims is the professional installation and
commissioning of the device.
Note!
Arrange for Reflex Customer Service to carry out commissioning and
annual maintenance, 12.1 "Reflex Customer Service", 51.
3
Safety
3.1
Explanation of symbols
The following symbols and signal words are used in this operating manual.
DANGER
Danger of death and/or serious damage to health
•
The sign, in combination with the signal word 'Danger', indicates
imminent danger; failure to observe the safety information will result in
death or severe (irreversible) injuries.
WARNING
Serious damage to health
•
The sign, in combination with the signal word 'Warning', indicates
imminent danger; failure to observe the safety information can result in
death or severe (irreversible) injuries.
CAUTION
Damage to health
•
The sign, in combination with the signal word 'Caution', indicates danger;
failure to observe the safety information can result in minor (reversible)
injuries.
ATTENTION
Damage to property
•
The sign, in combination with the signal word 'Attention', indicates a
situation where damage to the product itself or objects within its vicinity
can occur.
Note!
This symbol, in combination with the signal word 'Note', indicates useful
tips and recommendations for efficient handling of the product.
3.2
Personnel requirements
Only specialist personnel or specifically trained personnel may install and operate
the equipment.
The electric connections and the wiring of the device must be executed by a
specialist in accordance with all applicable national and local regulations.
3.3
Personal protective equipment
Use the prescribed personal protective equipment as required (e.g. ear protection,
eye protection, safety shoes, helmet, protective clothing, protective gloves) when
working on the system.
Information on personal protective equipment requirements is set out in the
relevant national regulations of the respective country of operation.
3.4
Intended use
The device is used in facility systems for stationary heating and cooling circuits.
The devices may be used only in systems that are sealed against corrosion and
with the following water types:
•
Non-corrosive.
•
Chemically non-aggressive.
•
Non-toxic.
Minimise the entry of atmospheric oxygen throughout the facility system and into
the make-up water.
Note!
Ensure the quality of the make-up water as specified by national
–
Note!
•
•
•
3.5
Inadmissible operating conditions
The device is not suitable for the following applications:
•
Outdoor operation.
•
For use with mineral oils.
•
For use with flammable media.
•
For use with distilled water.
Note!
It is not permitted to make any modifications to the hydraulic system or
Servimat M/L — 25.07.2024
Notes on the operating manual
regulations.
For example, VDI 2035 or SIA 384-1.
To ensure fault-free operation of the system over the long-term,
glycols whose inhibitors prevent corrosion phenomena must always
be used for systems operating with water/glycol mixtures. It must
also be ensured that no foam is formed due to the substances in the
water. Otherwise this could endanger the entire function of the
vacuum spray pipe degassing as this can lead to sedimentation in
the vent pipe and therefore leaks.
The specifications of the respective manufacturer are always
decisive for the specific properties and mixing ratio of the
water/glycol mixtures.
Types of glycol must not be mixed and the concentration is generally
to be checked every year (see manufacturer information).
the circuitry.
English — 29
Publicité
