immer-mobil TCN 8200 Mode D'emploi page 86

Model
400Volt/3ph/50Hz DV
200/230Volt/3ph 50Hz DV
200/230Volt/3ph 60Hz DV
400Volt/3ph 50Hz
200/230Volt/3ph 60Hz
TCN 8200
200/230Volt/3ph 50Hz
TCN 8240
200/230Volt/1ph 50Hz
TCN 8260
200/230Volt/1ph 60Hz
115Volt/1ph 60Hz
200/230Volt/1ph 50/60Hz DV
115Volt/1ph/60Hz DV
AIR MOTOR
The noise levels indicated correspond to emission levels and do not necessarily represent
safe operating levels. Although emission levels and exposure levels are connected,
this relation cannot be used as a safe parameter to determine whether or not further
precautions are necessary. The noise level to which the operator is exposed to depends
on a number of factors, such as duration of exposure, characteristics of the workplace,
other sources of noise etc. Permissible noise exposure levels may also vary from country
to country. In all cases, this information will enable machine users to better assess the
danger and risks involved.
1.2.e. AIR PRESSURE
The machine is equipped with an internal pressure limiting valve to minimize the risk
of over inflating the tyre.
1. Never exceed these pressure limitations:
• The supply circuit pressure (from the compressor) is 220 psi (16 bar).
• The operating pressure (indicated on the regulator) is 150 psi (10 bar).
• The tyre inflation pressure (displayed on the pressure gauge) must never exceed the pressure
indicated by the manufacturer on the sidewall of the tyre itself.
2. Activate the air inflation jets only when inserting the bead.
3. Fully bleed air pressure system before disconnecting power supply line or other pneumatic
components. Air is stored in a reservoir to operate the inflation jets.
4. Activate the air inflation jets only if the rim is correctly clamped on the tyre changer (if
required) and the tyre is completely mounted.
86
Motor rating
Number
kW
of rpm
0.9 - 1.5 6-12
0.9 - 1.5 6-12
0.9 - 1.5 6-12
0.75 8.5
0.75 8.5
0.75 8.5
0.75 8.5
0.75 8.5
0.75 8.5
0.75 6-15
0.75 6-15
/ 6.5
Torque Weight of electric/
Nm electronic part kg
900 11.5
1200 11.5
1200 11.5
900 11.5
1200 11.5
1200 11.5
800 11.5
800 11.5
800 11.5
1200 10.2
1200 10.2
800 /
Operator manual