immer-mobil TCN 8200 Mode D'emploi page 106

- Press the pedal
8.5. WHEEL DEMOUNTING
- Turn the handle
-
Press the button
tool head against the rim edge (TCN 8240 and TCN 8260).
- Manually move the mounting/demounting tool head against the rim edge (TCN 8200)
- Turn the handle
Important: turn the handle
vertical and horizontal arms simultaneously while the
mounting/demounting tool head goes slightly upwards
moving away from the rim edge (fig.22).
The space between the rim and the tool head will be
maintained for as long as the handle is in the locking
position.
The operator can tilt the pole freely (e.g. when
demounting wheels of the same size) without
repositioning the tool head.
106
20
to move the column into the working position. (Fig.21).
to release the vertical and horizontal arms simultaneously.
in the central position to move the mounting/demounting
to lock the tool head into the working position (Fig. 23b).
to lock both the
21
B
22
Operator manual