immer-mobil TCN 8200 Mode D'emploi page 79

to the warnings of the adhesive labels affixed to the equipment.
23. Disconnecting the pneumatic supply, both due to non-use or to maintenance of the
machine or the pneumatic system of the workshop, can leave pneumatic actuators
under pressure. Discharge the machine pneumatic system using the controls on the
actuators.
24. Use a lifting device if the wheel weighs more than 10 kg, with a
lifting frequency of more than 20 wheels/hour.
1.2.b. LABELS PLACEMENT
No. Part Number
1 35017099
2A 35019950A
2B 35020887
4-136771
4-119529
4-119528
3
4-136815
4-119546
4-119548
4-119530
3
4-119549
A 224 A Operator manual
Drawing Description
LABEL, RISK OF IMPACT,
FRONT POLE
LABEL, PEDAL CONTROLS
1 SPEED
LABEL, PEDAL CONTROLS
2 SPEED
PLATE TCN 8260-2
PLATE TCN 8240-2
PLATE TCN 8200-2
PLATE TCN 8260-2 FI
PLATE TCN 8240
PLATE TCN 8240-2 FI
PLATE TCN 8200
PLATE TCN 8200 FI
UK
79