immer-mobil TCN 8200 Mode D'emploi page 103

If the wheel weighs more than 10 kg, with a lifting frequency of more than 20 wheels/
hour, it is recommended to use a lifting device (optional).
- Turn the clamping handle
the operating arms in the "non-working" position
(tool at the top and horizontal arm completely
retracted) (A Fig. 18a).
- Turn the clamping handle
the arms into the "non-working" position.
- Press pedal
column into the "non-working" position (B Fig. 18a).
FOR TCN 8240 - TCN 8260 ONLY:
- If necessary, set the diameter range (10"→20" or
14"→24" for TCN 8240 - 10"→22" or 14"→26" for
TCN 8260), using the adjustment device located
below the turntable, (1-2-3 Fig. 18d) as follows:
• Press pedal
turntable jaws (Fig. 18d).
• With the machine completely stopped,
remove the locking pin using the knob (A
Fig.18d), making sure not to press any control.
Operator manual
CAUTION
to position
to lock
(Fig. 18b) to take the
to fully open the
18b
17
18a
UK
18c
103