Publicité
Les langues disponibles
Les langues disponibles
Section 4
Exterior Cleaning
Clean the area around the ice machine as
often as necessary to maintain cleanliness
and efficient operation. Use cleaners
designed for use with stainless steel
products.
Sponge any dust and dirt off the outside of
the ice machine with mild soap and water.
Wipe dry with a clean, soft cloth.
Heavy stains should be removed with
stainless steel wool. Never use plain steel
wool or abrasive pads. They will scratch the
panels.
Part Number 000017556 Rev 00 9/22
Removal from Service/Winterization
All Models
1.
De-scale and sanitize the ice machine.
2.
Move the ICE/OFF/CLEAN switch to
OFF.
3.
Turn off the water supply, disconnect
and drain the incoming ice-making
water line at the rear of the ice
machine and drain the water trough.
4.
Energize the ice machine, wait one
minute for the water inlet valve to
open and blow compressed air in both
the incoming water and the drain
openings in the rear of the ice machine
to remove all water.
WATER-COOLED MODELS ONLY
• Disconnect the incoming water and drain
lines from the water-cooled condenser.
• Insert a large screwdriver between
the bottom spring coils of the water
regulating valve and pry open the Water
Regulating Valve.
• Hold the valve open and blow
compressed air through the condenser
until no water remains.
All Models
5.
Move ICE/OFF/CLEAN switch to OFF
and disconnect the electric power
at the circuit breaker or the electric
service switch.
6.
Fill spray bottle with sanitizer and
spray all interior food zone surfaces.
Do not rinse and allow to air dry.
7.
Replace all panels.
Maintenance
39
Publicité
