Télécharger Imprimer la page

Manitowoc S3000 Mode D'emploi page 35

Publicité

Les langues disponibles

Les langues disponibles

Section 4
Step 6
Mix a solution of de-scaler and
warm water. Depending upon the amount
of mineral buildup, a larger quantity of
solution may be required. Use the ratio in
the table below to mix enough solution to
thoroughly clean all parts.
Solution
Type
De-scaler
1 gal (4 L)
Step 7
Use half of the de-scaler/water
mixture to de-scale all components.
The de-scaler solution will foam when it
contacts lime scale and mineral deposits;
once the foaming stops use a soft-bristle
nylon brush, sponge or cloth (NOT a wire
brush) to carefully de-scale the parts. Soak
parts for 5 minutes (15 - 20 minutes for
heavily scaled parts). Rinse all components
with clean water.
Step 8
While components are soaking,
use half of the de-scaler/water solution
to de-scale all foodzone surfaces of the
ice machine and bin. Use a nylon brush or
cloth to thoroughly de-scale the following
ice machine areas:
• Side walls
• Base (area above water trough)
• Evaporator plastic parts - including
top, bottom, and sides
• Bin
Step 9
Rinse all areas thoroughly with
clean water.
Part Number 000017556 Rev 00 9/22
Water
Mixed With
16 oz
(475 ml)
De-scaler
Detailed Sanitizing Procedure
Step 1
Mix a solution of sanitizer and
warm water.
Solution
Type
Sanitizer
6 gal (22 L)
Step 2
Use half of the sanitizer/
water solution to sanitize all removed
components. Use a spray bottle, cloth, or
sponge to liberally apply the solution to
all surfaces of the removed parts. Or soak
the removed parts in the sanitizer/water
solution. Do not rinse parts after sanitizing.
Step 3
Use half of the sanitizer/water
solution to sanitize all foodzone surfaces of
the ice machine and bin (or dispenser). Use
a spray bottle, cloth, or sponge to liberally
apply the solution. When sanitizing, pay
particular attention to the following areas:
• Side walls
• Base (area above water trough)
• Evaporator plastic parts - including
top, bottom and sides
• Bin
Do not rinse sanitized areas.
Step 4
Replace all removed components.
Step 5
Wait 20 minutes.
Step 6
Reapply power to the ice machine
and place the toggle switch in the CLEAN
position.
Maintenance
Water
Mixed With
4 oz
(120 ml)
Sanitizer
35

Publicité

loading