Main Menu; Program Step Recall - Corghi Exact 70 Manuel D'utilisation

If the icon selected has a sub-menu, it will open
vertically and the icon selected will be replaced
by . Use this icon or the ESC key to close
the menu.
identifies additional icons in the menu
for display.
Icons which are not active are plain grey in colour.

main menu

Start Begins the vehicle alignment pro-
cedure.
Alignment mode Selects the guided
wheel alignment procedure: quick, complete or
customised.
Alignment procedure Selects the wheel
alignment procedure: quick, complete or custom-
ised.
Databank and job management Tools
for management of the jobs archive and user
databank.
Set-up and maintenance Gives access
to the utility functions for wheel aligner set-up and
maintenance.
Service programs Gives access to the
wheel aligner service and troubleshooting func-
tions.
Last job Restarts the wheel alignment
procedure by loading the data of the job just
completed.
Shutdown Activates the program closure
and wheel aligner switch-off procedure.
Help Recalls the information for the current
video page to the screen.
60
Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
http://www.eichstaedt-elektonik.de
The on-line instructions back up the Operator's
Manual but do not replace it in all respects.

Program step recall

Diameter selection Recalls input of the
rim diameter to be used in toe measurements in
millimetres / inches.
Chassis height For vehicles where this is
necessary, recalls input of the chassis heights neces-
sary to obtain the databank references
Steering angle Recalls the steering lock
procedure for measurement of the caster, king
pin, steering angle difference at 20° and maximum
steering angle.
Data summary Recalls the summary of
the vehicle data.
Front axle Recalls the front axle adjust-
ment step.
Rear axle Recalls the rear axle adjust-
ment step.
Data summary and printout Recalls the
job data summary, printout and save step.
End of session Ends the current job and
returns to the main menu.
Vehicle adjustment Selects the help
function for adjustment of the vehicle. Only the
help selections available are active.
Vehicle selection Recalls selection of the
vehicle from the databank.
Databank data summary Recalls the full
summary vehicle's databank references.
Operator's Manual EXACT 70
.