Corghi Exact 70 Manuel D'utilisation page 69

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
➥_ Short-form selection
___YES: during vehicle selection the model is sup-
plied with single description.
___No: during vehicle selection the model is sup-
plied with multiple description.
➥_ Selection by year
___YES: selection of vehicle by year of MOT registra-
tion on.
___No: selection of vehicle by year of MOT registra-
tion off.
➥_ Vehicle description
___Commercial: vehicle description supplied using
commercial names.
___Manufacturer: vehicle description supplied by
means of the codes used by the manufacturers
to identify the different types of wheel align-
ment.
Job record
➥_ Type
___Quick: record containing on the essential cus-
tomer and vehicle data.
___Complete: record containing full data on the
customer and vehicle
➥_ Record sorting
___Date: In the management function job records
are sorted by date.
___Customer: In the management function job
records are sorted by customer.
___Vehicle registration number: In the manage-
ment function job records are sorted by vehicle
registration number.
___Operator: In the management function job
records are sorted by operator.
___Order number: In the management function job
records are sorted by order number.
➥_ Customer correspondence
___No.
➥_ Enable modifications
___Yes: allows modification of the adjustment data
of a job saved in the memory.
___No:
Alignment procedure customisation
➥_ Vehicle weight procedure enabling
___YES: vehicle weight procedure enabled
___No: vehicle weight procedure not enabled.
➥_ Visual check enabling
___YES: vehicle visual check procedure enabled.
___No: vehicle visual check procedure not ena-
bled.
Operator's Manual EXACT 70
➥_ Lift test
___Yes: recalls the lift test, "LIFT AND SENSOR
___No
➥_ Vehicle selection
___Always activated: Selection of vehicle from data
___On request: Selection of vehicle from data bank
➥_ Vehicle selection mode
___Databank: Selection of vehicle from databank,
___Job record: compilation of job record with activa-
➥_ Rim diameter
___Always: If toes are set in millimetres or inches
___On request: If toes are set in millimetres or
➥_ R.O.C.
___Always: R.O.C. procedure is compulsory.
___Manual skip: R.O.C. procedure is always acti-
___Automatic skip: R.O.C. procedure is skipped
➥_ Caster measurement steering lock
___Always activated: Caster measurement steering
___On request: Caster measurement steering lock
___If adjustable: Caster measurement steering lock
➥_ Rear
___Always activated: Rear axle adjustment always
http://www.eichstaedt-elektonik.de
CHECK" section, at switch-on
bank always activated.
activated on request.
job record compilation on request
tion of vehicle from databank if necessary.
the step for input of the rim diameter is always
activated.
inches the step for input of the rim diameter
is activated by the operator, or automatically if
the reference diameter is not available in the
databank.
vated but can be skipped in manual mode.
automatically (can be performed later by manual
recall).
lock always activated.
activated on request.
only recalled if at least one of the angles that
can be measured is adjustable (caster, king pin,
steering angle difference at 20° and maximum
steering angle).
activated.
EN
69