Main Operating Parts - Corghi ARTIGLIO 500 Manuel D'utilisation

MAIN OPERATING PARTS

WARNING
Learn all about your machine: the best way to prevent accidents and obtain top per-
formance is to get to know exactly how it works. Learn the function and layout of all
the controls. Check carefully that each of the controls operates as it should. To avoid
any risk of accident and injury, the machine must be installed and operated correctly,
and serviced regularly.
The machine's main operating parts are shown in fig. 5.
1 Body
2 Wheel lift (optional accessory) - Part 7 -.
3 Motor guard.
4 Centring handle (device for clamping the wheel to the turntable).
5 Mobile mount/demount head.
6 Side-swinging tool head arm.
7 Demount tool control cylinder.
7a Tool head descent cylinder.
8 Supporting column.
9 Panel with arm swing control and pressure gauge (fig. 5).
9-1 Wheel pressure gauge
9-2 Deflation button
9-3 Tool arm opening control valve
10 Accessories tray
11 Wheel support and centring unit.
12 Control panel
12-1 Bead-breaking arm release button
12-2 Upper bead-breaker up/down control valve
12-3 Lower bead-breaker up/down control valve
12-4 Upper bead-breaker disk penetration control valve
12-5 Lower bead-breaker disk penetration control valve
12-6 Bead-breaker arm simultaneous forward/reverse movement control valve
12-7 Moving tool head mounting/demounting control valve
13 Bead breaker disc.
14 Tilting bead breaker unit.
15 Pedal control unit.
16 Grease container.
17 Wheel lift control.
18 Filter Regulator + Lubricator unit (unit which regulates, filters, dehumidifies and
lubricates the compressed air supplied), (fig.7).
19 Dataplate.
20 Relief valve .
21 Air tank .
22 Doyfe union.
Operator's manual Artiglio 500
GB
57