Key To Caution And Instruction Labels; Main Features - Corghi CompactLine EM 9250 Manuel D'utilisation

- Low balancing speed:
• minimises wheel spin times;
• reduces risk due to rotating parts;
• saves energy.
- Automatic sensor for distance and diameter measurement.
- Automatic mechanical sensor for width measurement (if present).
- LaserBlade pointer ie laser line inside the automatic detection arm to indicate the
position of the balancing plane acquisition (available on request).
- AWD (Auto Width Device) programme for measuring the width using an ultrasonic sensor
(if present).
- AWC" (Auto Width Calculation) programme for enabling the manual insertion of the
width (if present).
- Automatic brake for stopping the wheel at the end of the spin.
- Wheel-holder shaft locking brake.
- STOP button to stop the machine immediately.
- Side flange holders.
- Top tray to take weights of all types.
- Automatic start by lowering the guard.
90

Key to caution and instruction labels

Never use the wheel spin shaft as a lifting point for the machine.
Unplug the power supply plug before performing any maintenance/
repair operations on the machine.
Do not lift up the guard when the wheel is turning.
Please use centring accessories with hole diameter 40 mm.

MAIN FEATURES

EM 9250 - EM 9250 C CompactLine Operator's manual