Publicité
Les langues disponibles
Les langues disponibles
•
Then enter the room temperature,
which should be kept during the period
of night-time reduction.
By pressing the menu key you may return to the automatic mode of the control.
Adjustment of the cooling
Please note: This menu item is only displayed if the multifunctional relay has
been adjusted for the function "cooling".
•
After pressing the menu key, use the + or – keys to select the menu "Set
cooling or operate manually" and confirm with ok.
•
The display shows:
After pressing the ok key, the cooling may
be switched on and off with the - key.
The status will be indicated.
•
If during the question whether you would like to manually operate the
cooling, you press the menu key, you may adjust the values for automatic
operation.
•
By using the + and – keys, you may adjust
the indoor temperature which must be
exceeded to switch on the cooling.
Confirm with ok.
By pressing the menu key you may return to the automatic mode of the control.
Adjustment of ventilators (WGBLs/wireless ventilation unit)
and Daikin wireless air-conditioning units
Under this menu item, you adjust the values for the automatic mode of the
ventilation (ventilators at WGBLs and/or wireless ventilation units) and wireless
air-conditioning (Daikin air-conditioning unit), and you have the possibility to
manually operate the connected equipment.
Please note: This menu item is only displayed if WGBLs or wireless ventilation
units or Daikin air-conditioning units are connected, and if their basic
configuration has been completed (see chapter "Basic adjustment of ventilators
at WGBLs", p. 112 and "Teach-in of radio subscribers", p. 113).
90
Night reduction of
heating until indoor
temp. reaches 10°C
Keys: menu + ok -
Do you want to
operate the cooling
manually?
Yes = ok No = menu
Cooling on if
indoor temperature
exceeds 30°C
Keys: menu + ok -
Publicité
