Publicité
Les langues disponibles
Les langues disponibles
•
Now adjust the speed for the wind alarm.
Use the + and/or – keys and confirm
with ok.
Irrespective of the other selected settings,
the blind will then be retracted in case of wind alarm.
Blinds do not react to rain alarm, in order to maintain their shield function, if
needed, even in case of bad weather conditions.
•
Next you may adjust the automatic
reversing system. For this purpose, press
ok or press menu if you not want
reversing.
•
First the top end position is requested.
If the blind is not fully retracted,
please press the + key until the shading
has been fully raised.
Confirm with ok.
•
Now using the – key, move the blind
into the position where the drive is to
stop in future if automatically operated.
•
When the desired position has been reached, release the key and the drive
will stop. You may read the programmed runtime in the bottom display
line. Confirm the adjustment with ok.
•
In case of blinds with slats, which extend
with their slats closed, you may adjust the
angle for reversing. Put the slats into the
desired position by using the + key. You
may read reversing time in the bottom display line.
•
After pressing the ok button, the automatic positioning and reversing
system is set.
You may change or repeat these adjustments as you wish. If you would like to
disable the automatic reversing system, enter 0 with the corresponding time
values (or simply retain the default setting) and confirm with ok. By pressing the
menu key you may return to the automatic mode (starting position).
Retract blind x if
wind speed
exceeds 4.0m/s
Keys: menu + ok -
Set automatic
reverse of blind x?
Yes = ok key
No = menu key
Is blind x in
top end position?
Yes = ok key
No = + key
Lower blind x into
position using the
- key
Runtime 0
Move slats of
blind x into posit.
using the + key
Runtime 0
85
Publicité
